Last month we showed some options for out of the box ways of prepping for an air conditioning installation.
more
|
In a world so full of kits and bolt-on parts, it's rewarding to do something unique and out of the norm-but sometimes veering off the beaten path is done out of necessity.
more
|
Every day there are people thinking about plunking down their cold, hard cash for an independent front suspension setup for their vintage truck.
more
|
Follow along as we install this 2008 4.6L SOHV Ford Racing Performance Parts engine into a 1968 Ford F-100.
more
|
Ford Racing Performance Parts has a new stand alone wiring harness for 2005-2010 4.6L SOHC V-8 engine which we are using to hookup a 2008 4.6L SOHC V-8 engine that will run in our 1968 Ford F-100.
more
|
Check out the wood truck bed installation kit we installed on our Ford F-1 project car!
more
|
Check out the front and rear bumper installation that we performed on our 1968 Ford F-100 giving it a much needed face lift!
more
|
Rarely does a classic truck bed survive though out the years. This is the case with our Ford F-1 project. We show you how to repair your bed with sheet metal so your truck bed looks like it did when it was new.
more
|
Our 1968 Ford F-100 Bumpside Build-Off project truck is cooling off with a new aluminum radiator from US Radiator.
more
|
We restore the front end of our Ford F-1 project truck with installing sheetmetal body panels.
more
|
Fix those sagging doors with this install of new door hinges and latches on our Ford F-1 project truck.
more
|
Get rid of those rusty tailgate chains on your Ford Flairside with this install of MAR-K hidden tailgate hinge kit.
more
|
New Performance products featuring Ford Racing Performance Parts engine and Holley Performance Products mechanical fuel pumps, many other products as well.
more
|
The bumpside continues with Grants 1968 Ford F-100, read along as this F-100 gets new fender walls from National Parts Depo.
more
|
Replacement of the stock steering system of a Ford F1 truck with a new steering column from Flaming River.
more
|
Step by step tech article about 1967-1973 Ford F100 disc brake upgrade featuring replacement of the master cylinder and disc brakes.
more
|
Read about how to replace your windshield wipers with this wiper replacement kit from Pacific Western Design on a Ford F1.
more
|
Read about replacing damaged rear fender hardware of our Ford F1 truck with parts from NPD, Totally Stainless & Eastwood Company.
more
|
Check out these new performance trucks parts with new Billet Tie Rod Adjusters from Air Ride Technologies and new gauges from Dolphin Instruments and much More!!!
more
|
Check out how to diagnose your own clutch system problem to help prevent some potentially serious problems further down the line.
more
|
1952 Ford F1 project truck with the Chrysler Hemi Engine installation with parts from Total Cost Involved, Chassis Engineering.
more
|
Setup an Aeromotive fuel system with your late-model motor.
more
|
Check out this rearend upgrade on a Ford F-1 truck.
more
|
Check out this 1968 Ford F100 get custom brake lines parts from Inline Tube and Classic Performance Products, Featured in the 2008 March Issue of Classic Trucks Magazine.
more
|
Check out how to get a custom fenders for your 1953-1956 Ford F100 with these tech tips from Waddington Street Rod & Restoration, Featured in the 2008 March Issue of Classic Trucks Magazine.
more
|