One of the coolest things about us hot rodders (be we classic truck or car guys) is our willingness to try just about anything.
more
|
There isn't a hot rodder worth his toolbox who doesn't own or wishes he owned a pickup truck.
more
|
This month's Classic Cruiser is from Bill Vaughn of Jackson, Michigan. He recently finished up his '39 Chevy truck that started out as a true basket case four years ago.
more
|
Check out this completely customized 1948 Chevy Pickup Truck!
more
|
With so many 1955-1959 Chevy trucks being lowered the wrong way we show you how to correctly lower these trucks with a mono leaf upgrade.
more
|
With all the engine options out there road-blocks are going to happen. We ran in one with an install of our 235 engine with a Gear Star Turbo 350. Follow along as we remove the stock firewall and replace it with a Direct Sheetmetal firewall on our 1939 Chevy project truck.
more
|
Check out Brian Sabo's 1940 Chevy 1/2 ton pickup truck which was on its way to the junkyard. Brian couldnt let a that happen so he restored it and added a LT1 engine with Sanderson headers and a 4L60E transmission.
more
|
Check out Dennis Glass's 1957 1/2 ton Chevy pickup truck which has a 305 Chevy engine, a 700-R4 transmission and a 3.73:1 rearend.
more
|
Check out Tim Brogan custom 1956 Chevy pickup truck with a 1993 Chevy 350 engine under the hood and a set of BFGoodrich tires to burn rubber with.
more
|
Check out Bob Brittingham's fully restored 1937 Chevy Pickup Truck which was his first vehicle in High School.
more
|
Rob talks about his new 1947 Chevy project truck and how you can build a 47-53 truck from scratch.
more
|
Classic Industries has updated there catalog collection with there newest book for Chevrolet and GMC Trucks.
more
|
Check out Mark Giambalvo's 1952 Chevy Pickup Truck that has Billet Specialties valve covers and Sanderson headers.
more
|
Check out Fred Perez's 1954 Chevy 3100 pickup truck. This former farm truck is powered by a Thriftmaster 235 engine and has a two tone paint job consisting of PPG Adole Beige and Moss Green.
more
|
Check out Cary Blades two tone 1941 Chevy Truck which has a bottle of Jack if your thirsty and a Tommy gun shifter.
more
|
Check out Mike Carpenter's First Series 1955 Chevy 3100 Pickup Truck with a GM Performance 350 small block engine and a Billet Specialties steering wheel.
more
|
Come check this amazing 1955 Chevy Truck featuring a set of 17-inch Boyd Coddington Timeless wheels, a Edelbrock Performer intake manifold and carb combo and C-notched rear frame.
more
|
Take pleasure in this awesome step by step air conditioning installation for Chevy trucks between the years of 1967 and 1972.
more
|
Our 1939 Chevy project trucks gets help from Total Cost Involved as they install a new IFS for this diamond in the rough.
more
|
Check out Lloyd Triplett's custom 1946 Chevy pickup truck which is powered by a 350 small-block V-8 engine / Turbo 350 transmission combo.
more
|
Check out Dick & Brad Stevens' 1941 Chevy Pickup Truck with a Pertronix ignition and a Lecarra Mark 10 steering wheel.
more
|
Check out replies from some of the readers of Classic Trucks on Robs new 1939 Chevy project truck and answers to some DIY tech questions.
more
|
Fitting 47-55 Chevy trucks this 2 piece hood will keep you out of the salvage yards and get you into the paint booth. This NEW die-stamped, sheet metal product comes EDP coated to keep it free of rust and corrosion and includes correct mounting points to add your hardware.
more
|
Upgrade the brakes for your 1955-1959 Chevy Truck with the CPP six lug brake kit.
more
|
Check out Reed and Carol Petersen's 1966 Chevy Truck, and read about how they sold it and then re bought years later.
more
|